Western Hoist, Inc.
1839 Cleveland Avenue
National City, CA 91951
Phone (619) 474-3361
Fax (619) 474-8261

Select your lift below to see a list of quality replacement parts.

WSO and Y2K Models

Part#	Description	Part#	Description
S-600	4" UPPER/LOWER PULLEY	S-1060	HIGH PRESSURE HOSE 28'-0"
S-700C	MANUAL RELEASE VALVE SUBASSEMBLY	S-1061	HIGH PRESSURE HOSE 5'-7"
S-707	MICRO SWITCH ONLY	S-1070	SLIDE BLOCK SET (8)
S-711	SHUT-OFF PLUNGER & BUTTON	S-1071	LOCK COVER PUMP SIDE
S-712	1/8" SWITCH SHUT-OFF ROD	S-1072	LOCK COVER NON-PUMP SIDE
S-801	ANCHOR BOLT ASSEMBLY (3/4")	S-1075	CARRIAGE ASSEMBLY
S-833	90 DEGREE FITTING FEMALE TO MALE ENDS	S-1076	LIFT LOCK NON-PUMP SIDE
S-900	"U" SHIMS (PLASTIC) BAG OF 10	S-1077	LIFT LOCK PUMP SIDE
S-1010	PUMPING UNIT	S-1078	LOCK RELEASE CABLES & CRIMPS (SET)
S-1020	CYLINDER	S-1079	LIFT LOCK RELEASE HANDLE & BALL
S-1030	CABLE 1/4" X31'-5"	S-1081	BUMP BAR BRACKET
S-1034	' 9"X 1-1'2" ARM PIN	S-1082	1 -3/8" ROLLER BRACKET & TEFLON PULLEY
S-1035	ASYMMETRIC OUTER-ARM FRONT	S-1083	CARRIAGE STOP PLATE
S-1036	ASYMMETRIC OUTER-ARM REAR	S-1084	CARRIAGE STOP PLATE (WRAP AROUND)
S-1040	STANDARD OUTER-ARM	S-1085	PUMP LOWERING HANDLE
S-1045	STANDARD INNER-ARM	S-1090	90 DEGREE ELBOW
S-1046	ASYMMETRIC INNER-ARM FRONT	S-1091	1/4" TEE FITTING
S-1047	ASYMMETRIC INNER-ARM REAR	S-1092	1/4" X 5-1/2" NIPPLE
S-1048	ARM LOCK RELEASE PIN W/HARDWARE	S-1093	1/4" X 4" NIPPLE
S-1050	OVERHEAD BRIDGE	S-2000	SCREW-UP ADAPTER WITH PAD
S-1051	OVERHEAD BUMP BAR	S-2001	RUBBER PAD FOR SCREW-UP
S-1052	BOTTOM PULLEY AXLE	S-2002	RUBBER PAD FOR HEIGHT ADAPTER
S-1053	TOP PULLEY AXLE W/HARDWARE	SVT-1	SET (4) HEIGHT ADAPTERS FOR 7,000 LB.
S-1054	TOP PULLEY BRACKET	SVT-2	SET (4) HEIGHT ADAPTERS FOR 9,000 LB.